EasyManua.ls Logo

Polyend Tracker+ - Page 149

Polyend Tracker+
338 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
149
Polyend Tracker+ Manual
NOTES
Instruments
6
Continued
Function Parameter Range Description
Modulation Attack 0.00-10 Sec Modulation envelope attack time
Modulation Decay 0.00-10 Sec Modulation envelope decay time
Modulation Sustain 0.00-100% Modulation envelope sustain level
Modulation Release 0.00-10 Sec Modulation envelope release time
Modulation Frequency 0.1 to 100Hz Speed of the modulation wave
Modulation Waveform Options
Modulation wave shape: Triangle; Sin; Ramp
Up; Ramp Down; Square; Random S&H
Modulation Retrigger Options
Waveform retrigger: Free running will
continuously run; One Shot will cycle once
when a note is triggered; Note will trigger
from the start and continuously run each time
a note is triggered.
Voice Glide Mode Options
Slide between notes: Always, Overlap,
Legato i.e. Envelopes are not triggered,
Legato Overlap
Voice Glide Time 0.00 - 3 Sec Time of slide between notes.
Voice Volume 0-200% Volume level of oscillator voice
Function Parameter Range Description
Macro Macro Name Editable Select edit to use naming editor
Macro Bipolar On or Off Selects bipolar on or off for the macro control
Macro Parameter 1 Options
Target parameter options from the synth
engine to control with the macro.
Macro Amount 1 -2 to +2 Amount of modulation range applied
Macro Parameter 2 Options
Target parameter options from the synth
engine to control with the macro.
Macro Amount 2 -2 to +2 Amount of modulation range applied
Macro Parameter 3 Options
Target parameter options from the synth
engine to control with the macro.
Macro Amount 3 -2 to +2 Amount of modulation range applied
Macro Parameter 4 Options
Target parameter options from the synth
engine to control with the macro.
Macro Amount 4 -2 to +2 Amount of modulation range applied
Macro Parameter 5 Options
Target parameter options from the synth
engine to control with the macro.
Macro Amount 5 -2 to +2 Amount of modulation range applied
Macro options are repeated per Modulation slot.

Table of Contents

Related product manuals