Polyend Tracker+ - Page 148

148
Polyend Tracker+ Manual
NOTES
Instruments
6
Each synth model, FAT, VAP, WTFM, ACD or PERC has a designated set
of parameters whose values dene the patch sound.
Function Parameter Range Description
Oscillator Saw Mix 0-100% Saw wave mix
Oscillator Square Mix 0-100% Square wave mix
Oscillator Sub Mix 0-100% Sub oscillator mix
Oscillator Noise Mix -100% to 100% Noise generator mix
Oscillator PW 0-100% Pulse Width
Oscillator Sub Mode Options
Sub oscillator options for square, pulse and
triangle waves -1 or -2 octaves below the
main oscillator
Oscillator Pitch LFO -100% to 100%
Amount of the LFO modulation applied to
the oscillator pitch.
Oscillator PW Env -100% to 100% Pulse width envelope.
Oscillator PW LFO -100% to 100%
Amount of the LFO modulation applied to
the oscillator pulse width I.e pulse width
modulation.
Filter Cutoff 20Hz - 20kHz Filter cutoff frequency.
Filter Resonance 0-100% Filter resonance amount.
Filter Type Options
Filter types: Low Pass State Variable 12dB;
Low Pass State Variable 24dB; Low Pass
RD3.
Filter Env amt -100% to 100% Filter envelope amount
Filter Note track -200% to 200%
Amount of modulation applied based on the
pitch of the note played.
Filter LFO amt -100% to 100%
Low Frequency Oscillator modulation
amount applied to the lter
Amplier Attack 0.00-10 Sec Amplier envelope attack time
Amplier Decay 0.00-10 Sec Amplier envelope decay time
Amplier Sustain 0.00-100% Amplier envelope sustain level
Amplier Release 0.00-10 Sec Amplier envelope release time