Polyend Tracker+ - Page 296

296
Polyend Tracker+ Manual
NOTES
MIDI
11
▌ SETTING UP A MIDI SYNTHESIZER
1. Ensure the external device is congured to set MIDI CC as per the
Tracker+ CC assignments in the MIDI Synthesizer page. Also that the
MIDI conguration is matched, for example same MIDI channel.
2. Connect the external controller to Tracker+, for example using the MIDI
In connection and a MIDI cable between devices. Tracker+ uses a MIDI
dongle to convert between MIDI 5 Pin DIN and Mini Jack.
3. To get the reference of CC congurations set up as default for Tracker+,
Press [Instrument Parameters], select Screen Buttons [More], then
[Instrument Synthesizer]. The CC’s are displayed in the left window as a
reference.
4. To select an instrument as the destination target from the MIDI
controller and as the synthesizer instrument, scroll the right window to
select the desired instrument. This is also displayed in the top row.
5. The lists can be scrolled with the screen buttons. If the window is
selected, highlighted red, the [Up] and [Down] Buttons or the (Jog)
wheel will scroll the list.
6. The instrument parameters will adjust when controlled by the external
MIDI controller. The changes are animated real time on the instrument
parameter displays.