Polyend Tracker+ - Page 47

47
Polyend Tracker+ Manual
Projects
3
NOTES
▌ IMPORTING TO THE PROJECT INSTRUMENT LIST
1. Press [Sample Loader] to open the sample browser and instrument list
utility page.
2. Navigate to the left ‘SD Card’ window and navigate to and highlight a
sample to import. Use the [Up] or [Down] or Turn (Jog) to navigate and
Press [Enter] screen button to select folder.
3. Navigate to the central ‘Instruments’ window and highlight either an
empty slot or an existing instrument. If an existing instrument is
highlighted it will be replaced by the newly selected choice.
4. Press [Import], 5
th
Screen button. The sample is displayed for editing.
Pressing [Cancel], 6
th
Screen button at any time to leave the import
menu without importing.
5. The sample can have its start [Start], 2
nd
Screen button and end [End],
3
rd
Screen button adjusted. Select each an use (Jog) to adjust. This is a
great feature when samples are too long or only a portion is needed.
6. Press [Preview], 1
st
Screen button to listen to the sample. The option to
adjust the preview audio volume with, [Preview Vol], 7
th
Screen button.
7. When editing is complete, select an import option to load the sample
into the instrument list:-
• Press [Import Low Quality], 7
th
Screen button. This will import a
lower quality sample. This will create a smaller le size and save
memory. The trade off is audio sound quality reduction.
• Press [Import Normal], 8
th
Screen button. This will import a sample
at the normal Tracker+ quality specication. This will create a larger
le size and take up more memory. The trade off is optimum audio
sound quality.
Sample based Instruments can also be copied and pasted within the sample
loader and instrument list browser to duplicate and instrument. Use the [Copy/
Paste] dedicated button to undertake this task.