Polyend Tracker+ - Page 46

46
Polyend Tracker+ Manual
NOTES
Projects
3
▌ DELETING AN INSTRUMENT FROM THE LIST
1. Press [Sample Loader] to open the sample browser and instrument list
utility page.
2. Navigate to the central ‘Instruments’ window and highlight an existing
instrument. If an existing instrument is highlighted it will be the one
deleted in this process. Use [Shift] + Arrows to batch select multiple
samples / instruments.
3. Press [Delete/Backspace].
4. A prompt asking if you want to continue on to delete the highlighted
sample / instrument. Press [No], 7
th
Screen button to cancel without
deleting or conrm deletion by pressing [Yes], 8
th
Screen button.
5. The instrument is removed from the list but is still present on the SD
Card.
6. The memory bar chart will indicate the available project memory in
Tracker+. This will depend on the type and size of samples selected
and may limit the amount of instruments available in the instrument list.
7. Additional samples / instruments can be deleted. The instruments in the
list will be available to use in the project.
▌ DELETING ALL UNUSED INSTRUMENTS FROM THE LIST
1. Press [Sample Loader] to open the sample browser and instrument list
utility page.
2. Navigate to the central ‘Instruments’ window.
3. Press [Delete Unused], 6
th
Screen button.
4. A prompt asking if you want to continue on to delete the highlighted
sample / instrument. Press [No], 7
th
Screen button to cancel without
deleting or conrm deletion by pressing [Yes], 8
th
Screen button.
5. Any instruments that are in the list but not used in the project are
removed from the list. SD Card les remain intact.
6. The memory bar chart will indicate the available project memory in
Tracker+. This will depend on the type and size of samples selected
and may limit the amount of instruments available in the instrument list.