57
Polyend Tracker+ Manual
NOTES
Pattern Format
4
▌ SELECTING THE PATTERN MODE PAGE
1. Press [Pattern] to select the pattern mode page.
2. The options for the pattern page will show at the bottom of the page and
are represented by the 8 screen buttons.
3. To change the options page, Press [More], 8
th
Screen button. This
toggles between the two pages of pattern options.
▌ SELECTING A PATTERN
1. Press [Pattern] to select the pattern mode page.
2. Ensure options page 1 is displayed. Press [More] to toggle between the
two pages of pattern options.
3. Hold [Pattern] - 1
st
Screen button + Turn (Jog). A pattern number
between 1-255 can be selected. Blank patterns selected have 32 steps
as default. Arrow buttons can be used instead of Jog.
4. The currently active pattern number is displayed top left in the info bar.
▌ ADJUSTING THE PATTERN LENGTH
1. Press [Pattern] to select the pattern mode page.
2. Ensure options page 1 is displayed. Press [More] to toggle between the
two pages of pattern options.
3. Hold [Length] - 2
nd
from left screen button + Turn (Jog). A pattern length
between 1-128 steps can be selected. Default is 32. The arrow buttons
can be used instead of Jog where [Left] or [Right] will set length in
predened denominations i.e. 1, 2, 4, 8, 16 etc
Tip: It is good practice to build patterns starting with a small length. For example
start with 8 or 16 steps and create the beat or melody. This can then be duplicated
/ extended along with its steps and then edited to create longer passages.
To Next Page
Loading...
