Polyend Tracker+ - Page 58

58
Polyend Tracker+ Manual
Pattern Format
4
▌ EXTENDING PATTERN LENGTH
1. Press [Pattern] to select the pattern mode page.
2. Ensure options page 2 is displayed. Press [More] to toggle between the
two pages of pattern options.
3. Press [Rec] to select recording mode and allow editing. Screen buttons
will be unavailable, shown dim, otherwise.
4. The current pattern can be extended in severals ways. The options
available via the 8 screen buttons are:-
1. Press [Duplicate Pattern]. The pattern will be extended by
duplicating the full pattern along with its steps. Effectively doubles
the pattern length.
2. Press [Expand Pattern]. The pattern will be extended by inserting
additional step rows in-between existing steps. Effectively doubles
by stretching the pattern length.
3. Adjusting [Length] will also increase the pattern length. New empty
step rows added at the end.
5. The [Undo] or [Redo] screen buttons can be used if required to restore
a previous state.
Duplicate Pattern
Double the pattern length
Expand Pattern
Blank steps added after each step
Step 1 Step 1 Step 1
Step 4
Step 33
Step 32 Step 32
Step 64
Step 64
Step 2
Step 3
Step 2 Step 2
Step 5
Step 3 Step 3
Step 6
Step 34
Step 35
Step … Step …
Step 63
Step …
Step …
C5 40
----
P 25 C5 40
----
P 25 C5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25 C5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25
+
NOTES