Polyend Tracker+ - Page 65

65
Polyend Tracker+ Manual
NOTES
Pattern Format
4
▌ CHANGING PATTERN TOP INFO DETAILS
1. The default mode is for Tracker+ to display an information bar plus the
tracks at the top of the pattern display. This can be changed to give
more clarity to the tracker pattern grid.
2. Press [Cong] to open the project conguration menu.
3. Ensure the left window is highlighted red i.e. in focus. Navigate windows
by pressing [Left] or [Right]. Menu windows will automatically be
selected when pressing the relevant screen keys below the window to
navigate [Up] or [Down].
4. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box the
‘General’ option. Alternatively press the relevant screen keys below the
window to navigate [Up] or [Down].
5. Highlight red the General options window. Navigate windows by
pressing [Left] or [Right]. Menu windows will automatically be selected
when pressing the relevant screen keys below the window to navigate
[Up] or [Down].
6. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box over
the ‘Pattern Top Info’ option. Alternatively press the relevant screen
keys below the window to navigate [Up] or [Down].
7. To change the select between horizontal and vertical views, Press
[Change]. The parameter pop-up window listing the available options
will appear.
8. Turn (Jog) or Press [Up] / [Down] or [Up] / [Down] Screen Buttons to
highlight the desired option.
• Off - No information is displayed at the top of the page.
• Track Info Only - Only display the track number / name information.
• Additional Info: Display tracks, and upper bar expanded information,
such as time, transport, pattern, instrument etc. This is default.
9. Press [Apply] - 6
th
from left screen button to conrm selection or
[Cancel] - 3
rd
from left screen button to exit without changing.
10. The display will reect the selected option.