Polyend Tracker+ - Page 94

94
Polyend Tracker+ Manual
NOTES
Sequencing Steps
5
▌ PREPARING FOR LIVE RECORDING
A number of settings are available when recording live. These are optional
depending on circumstances.
• Set the Metronome On/Off: Cong > Metronome: State = On.
• Set the Pre roll count in On/Off: Cong > Metronome: Pre roll = On.
• Set Quantize: Cong > General > Recording Options
• Arm or Disarm a track to allow recording:-
Hold [Shift] + [Rec] + Screen Button to toggle arm/disarm per track.
Note that only arming the target track to record to will avoid steps
being recorded to adjacent tracks when steps are occupied.
• Ensure the Note parameter is highlighted which will allow recording
steps. If the Instrument or FX is highlighted by default, then these
will be recorded.
• Hold [Instrument] + Turn (Jog) or Press [PAD] to set a default
instrument to record.
▌ SETTING QUANTIZE RECORDING OPTIONS
1. Press [Cong] to select the settings options.
2. In the left window, Turn (Jog) to highlight ‘General’.
3. Press [Right] to select the ‘General’ sub menu.
4. In the central window sub menu, scroll using (Jog) to select ‘Recording
Options’. These will determine the quantize for recording:-
• Only Notes: Quantize notes only.
• Microtiming: Will record a nudge or offset as it is played by
recording as a ‘Micro-move’ FX value in the step. Delete these FX to
revert to quantized values.
• Velocity: Record velocity at a xed value with pads. Use an external
MIDI Keyboard to record in real time velocity values. Velocity is
recorded as an FX value.
• Microtiming + Velocity. Record into both FX the xed velocity and
real time microtiming values.