95
Polyend Tracker+ Manual
NOTES
Sequencing Steps
5
▌ REAL TIME LIVE RECORDING A PATTERN
1. Press [Pattern] to select the Pattern Mode page.
2. Hold [Instrument] + Turn (Jog) or Press [PAD] to select the instrument to
record. The Note will be live recorded with pads.
3. Press [Rec] + [Play] to start live recording mode. The sequencer will
start immediately or after a count in of 4 if ‘Pre roll’ is set on.
4. Press [PAD] in real time to record. The pad note will be recorded along
with the default instrument selected. Notes are recorded along with a
‘Note Off’ value.
5. To change optionally to instrument or FX recording, Press [Instrument]
or [FX] during live recording. A ‘Note Off’ value is not recorded with
these options.
6. Steps will be recorded into the current track. Notes will not be
overdubbed. Any recording that coincides with an existing note will by
default be recorded into the step row on the next track right. This
behaviour is dependant on arming of tracks.
7. Press [Rec] to leave recording mode but to continue playing.
8. Press [Play] to stop playback.
To Next Page
Loading...
