Chapter 2: Troubleshooting Your Library
Working With Command History Logs
116 Quantum Scalar i6000 User’s Guide
Note: The number of selected drives affects the performance of the
Command History Log.To ensure proper operations, limit drive
log requests to twenty-five.
Viewing Command
History Logs
1 Log on as an administrator.
2 You can perform this procedure while viewing either the physical
library or a partition. From the View menu, click the name of the
physical library or the appropriate partition.
3 Click Too l s > Command History Log. The Command History Log
dialog box appears.
The first example dialog box that follows represents the physical
view, and the second one represents a partition view. These
examples show expanded levels for “Controller LUNs”, “Partitions”,
and “Tape Drives”. Initially, these areas are not expanded. Click the
highest-level items to show next-level items.
To Next Page
Loading...
