Chapter 8: Encryption Key Management
FIPS-Certified Encryption Solution
292 Quantum Scalar i6000 User’s Guide
Viewing FIPS Status on
the Library
To view FIPS status on partitions, do either of the following:
• The Partition Configuration dialog box (Setup > Encryption >
Partition Configuration) shows which partitions are enabled for
FIPS. All tape drives in FIPS partitions are enabled. See
Figure 44 on
page 291.
• The Partitions Status report (Monitor > Partitions > Status) lists
FIPS in the Encryption column if FIPS is configured on the partition.
To Next Page
Loading...
