Chapter 15: Maintaining Your Library
Monitoring the Library
520 Quantum Scalar i6000 User’s Guide
• Location — The coordinates of the drive within the library
• State — Whether the drive is varied on or off
• Partition — Which partition the drive is assigned to
To w er s Ta b
The To w er s tab only displays if a tower (HDEM) is installed in the library
and details the following information:
• Tow e r # — The location of the tower in the library
• Status — If the tower is available
• Mode — If the tower is online or offline
• Scanner — If a barcode scanner is installed or not
• State — Whether the tower is varied on or off
• Door Status - Whether the rear access door is open or closed
Monitoring Drive Status The Drive Status dialog box displays status information for tape drives
in the currently selected partition. If you are viewing the physical library,
status information for all drives appears. You can perform this
procedure while viewing either the physical library or a partition.
1 Click Monitor > Drives. The Drive Status dialog box appears.
To Next Page
Loading...
