Chapter 15: Maintaining Your Library
Monitoring the Library
516 Quantum Scalar i6000 User’s Guide
• Using Library Explorer on page 553
• Drives on page 559
• Re-enable Robot Remotely on page 569
• Working With Connectivity on page 570
• Capturing Snapshots on page 572
• Updating Library Software on page 579
• Updating Drive Firmware on page 592
• Teaching the Library (Configuration and Calibration) on
page 599
• Saving and Restoring Library Configuration on page 601
• Viewing the Drive Resource Utilization Reports on page 610
• Setting Up Advanced Reporting Options on page 616
• Working With Verification Tests on page 622
• Using the Partitions Defragmentation Tool on page 674
• Removing Lodged Cartridges on page 677
• Using Sift Sort on page 678
• Retrieving MIBs on page 682
• Maintaining Air Filters on page 683
• Robot, Tower and Power Rail Health Checks on page 687
Monitoring the Library
The library can provide detailed information about the status of the
library and its various components. You also can access statistics about
the library and other helpful information, such as library and
component serial numbers, port numbers, World Wide Names (WWNs),
IDs, and firmware versions.
This section explains how to use Monitor menu commands to display
status information for the following general areas:
To Next Page
Loading...
