Quantum Scalar i6000 - Interpreting Ethernet Expansion Blade Leds

Chapter 2: Troubleshooting Your Library
Interpreting LEDs
102 Quantum Scalar i6000 User’s Guide
Interpreting Ethernet
Expansion Blade LEDs
The status LEDs for an Ethernet Expansion blade are located at the top
of the EEB above ETH 6.
Figure 27 shows the locations of the EEB status
LEDs.
Figure 27 Location of Ethernet
Expansion Blade Status LEDs
Table 15 Ethernet Expansion
Blade LED States
EEB status LEDs
Ethernet
Port status LEDs
Blue Green Amber Description
Off Off Off No power
1 Hz Off Off Powered Down - Ready for removal