Chapter 13: Running Your Library
Connecting to Multiple Libraries
438 Quantum Scalar i6000 User’s Guide
Note: If you are logging on to the library for the first time using
the default administrator account (admin), type
password. After you log on, the library prompts you to
change the default admin password. You must enter and
confirm a new password. Passwords that are most secure
include a combination of letters, numbers, and non-
alphanumeric characters. Passwords must be eight or more
characters in length. The word “password” is not available
for use.
5 Click OK.
Note: After logging on, do not close the Web browser window or
use it to navigate to another URL. Doing so will close the
LMC applet but might leave the current session active.
Logging Off the Web
Browser (Remote
Client)
1 Click Operations > Log Off, or click the Log Off button on the
toolbar. A message appears asking if you are sure you want to log
off.
2 Click Yes. The Scalar i6000 Logon dialog box appears.
3 To close the LMC applet, click Cancel.
Connecting to Multiple Libraries
This feature allows you log in to multiple libraries, and switch from one
library console to another without logging off.
Note: This feature is available only if all libraries are at the same
firmware level.
1 From the LMC menu, click Connection > New. The Connect to
Library dialog box appears.