Quantum Scalar i6000 User Manual

Chapter 16: Working With Cartridges and Barcodes
Managing and Moving Media
Quantum Scalar i6000 User’s Guide 703
Moving Media Within a
Partition
The Move Media dialog box enables you to move media from one
location to another within a partition.
Note: Only one cartridge can be moved at a time.
1 Make sure that you are viewing the partition within which you want
to move media. From the View menu, click the name of the
appropriate partition.
2 Click Operations > Move Media. The Move Media dialog box
appears.
The table in the Select Source area lists slot locations with
cartridges, and the table in the Select Target area lists slot locations
without cartridges.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing