Chapter 3: Configuring Your Library
Managing Connectivity
Quantum Scalar i6000 User’s Guide 173
Managing Connectivity
The Connectivity command on the Setup menu enables you to access
three connectivity-related commands for the library: Port
Configuration, Datapath Conditioning, and FC Host Port Failover.
For information about configuring data path conditioning monitoring
levels and intervals, see
Configuring Datapath Conditioning on
page 250.
Port Configuration Use the Port Configuration command to view and configure
connectivity parameters for FC ports. Port Configuration gives you
access to the FC ports on the I/O blades.
Note: You can only view EEB port connection status and configure or
view I/O blade port connections status.
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > Blades > Connectivity > Port Configuration. The
Connectivity dialog box appears.
To Next Page
Loading...
