Chapter 6: Automated Media Pool
Use an Automated Media Pool
278 Quantum Scalar i6000 User’s Guide
have the media redirected to the designated AMP partition. See Step 5
on page 264 in Chapter 4, Active Vault for redirect options.
1 Click Setup > Partitions > Policies > Auto Export Configuration.
The Auto Export Configuration dialog appears.
2 Select the partition for which you want to enable, modify or disable
the policy by clicking the check box in the Select column.
3 From the Destination drop-down menu, select the AMP partition to
which you want the tapes exported.
4 Click OK.
Use an Automated Media Pool
An AMP has two functions:
• Assign Storage Magazines to/from the AMP on page 279 — Assigns
storage elements from the AMP to a standard partition, or from a
To Next Page
Loading...
