Chapter 3: Configuring Your Library
Setting Up the Network Configuration
170 Quantum Scalar i6000 User’s Guide
Configuring DNS If DHCP is disabled, you can specify primary, secondary, and tertiary
Domain Name System (DNS servers). DNS servers provide IP address
resolution of fully qualified domain names. DNS settings are optional.
Caution: You must fully understand all network issues before you
change the network configuration for an already
configured library. It is recommended that you consult with
your network administrator before changing your network
configuration.
To configure DNS servers:
1 Log on as an administrator.
2 If you are not already working from the physical library, select the
physical library from the View menu.
3 Click Setup > Network Configuration > DNS Configuration. The
DNS Configuration dialog box appears.
4 Enter a primary DNS server IP address. Optionally, enter secondary
and tertiary addresses.
5 Click OK.
To Next Page
Loading...
