Quantum Scalar i6000 User Manual

Chapter 3: Configuring Your Library
Registering SNMP Traps
234 Quantum Scalar i6000 User’s Guide
Registering an
Application
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > Notifications > Trap Registration. The Trap
Registration dialog box appears.
4 In the Host/IP text box, type the iPv4 or iPv6 address or host name
of the host client running of the external application.
5 In the Port text box, type the number of the User Datagram Protocol
(UDP) port that you want to associate with the IP address or host
name.
6 Click Create.
The host application's IP address or name and UDP port number
appear in the table to indicate that the application is registered to
receive SNMP traps from the library.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing