Chapter 3: Configuring Your Library
About the Configuration Record
252 Quantum Scalar i6000 User’s Guide
6 In the Enter new Interval text box, type the amount of time that
should elapse between automatic monitoring checks. The interval
can range from 1 to 2,880 minutes (48 hours). The default interval is
60 minutes.
Note: The data path from I/O blade to the drive must experience
problems for two period intervals before a problem is
detected and a ticket is generated.
7 To save your configuration and return to the Datapath
Conditioning dialog box, click OK.
About the Configuration Record
The configuration record contains details about the library’s
configuration and can be sent to a specified e-mail address or saved as
a.txt file.
Information in the configuration record includes:
• Product information — Product name and version, MCB and RCU
versions, serial number, and modules/drives/partitions
configuration
• License information — License descriptions, quantities, and
installation dates
• Network information — Hostname, DHCP status, IP address, and IP,
Netmask, and Gateway addresses
• Partition information — Serial numbers, online/offline statuses, and
numbers of slots, drives, and I/E slots
• Drive information, for each drive — Location, partition, SCSI
element address, online/offline status, vendor, model, serial number,
logical serial number, firmware version, drive type, and interface
type:
• SCSI tape drives — SCSI ID
• Fibre Channel (FC) tape drives — World Wide Name (WWN) and
loop ID, speed, and connection type
To Next Page
Loading...
