Quantum Scalar i6000 User’s Guide 357
Chapter 10
Path Failover
Path Failover (formerly known as Native Storage Networking (nSNW)) is
a licensable feature that allows you to take advantage of control and
data path failover, as well as host access configuration features of IBM
and HP LTO-5 and later tape drives, without those drives being
connected to a Fibre Channel I/O blade and instead connected to an
Ethernet Expansion Blade (EEB)
Note: If an SNW license is applied to a drive that has dual ports, both
ports will be active. If there is no SNW license, only one of the
ports will be active.
This chapter covers:
• Use the Storage Networking Wizard on page 358
• License Drives for Path Failover on page 359
• Configure Control Path on page 361
• Configuring Data Path Failover on page 376
• Configuring Host Access to Storage Networking Drives and
Partitions on page 383
To Next Page
Loading...
