Quantum Scalar i6000 - Monitoring System Status

Chapter 15: Maintaining Your Library
Monitoring the Library
Quantum Scalar i6000 User’s Guide 517
•System
•Drives
• Connectivity
• I/E stations
• Extended I/E Slots
•Slots
•Media
•Sensors
• Email Configuration Record
•Users
• Partitions
•EKM Servers
Monitoring System
Status
The System Status dialog box displays status information for various
library entities (hardware or system metrics). You can perform this
procedure while viewing either the physical library or a partition.
1 Click Monitor > System or click the System Status button. The
System Status dialog box appears, displaying four (4) tabs,
Components Tab, Robots Tab, Drives Tab and, if installed, Tow ers
Tab . These are explained in detail below.