Chapter 3: Configuring Your Library
Working With Data Path Conditioning
Quantum Scalar i6000 User’s Guide 251
4 Click a blade to highlight it, and then click Configure. The
Datapath Conditioning Setting dialog box appears.
5 In the Level area, select the appropriate level. The default level is
Interface Test. To enable data path monitoring tickets, set the level
to Device Datapath Test.
The following table describes the functionality for each data path
monitoring level.
Level Name Functionality Description
Interface Test Performs tests to verify that Fibre Channel controllers on I/O blades are responsive
to commands.
Device Datapath
Tes t
Performs tests at the Interface Test level, and also performs a device inquiry on
each target device.
To Next Page
Loading...
