Chapter 13: Running Your Library
Logging On and Off
Quantum Scalar i6000 User’s Guide 437
2 If a security warning appears asking if you are sure you want to run
the applet, click Run or Yes. The Scalar i6000 Logon dialog box
appears.
3 In the Name text box, type the name of the user or administrator
account with which you want to log on. If you want to log on with
the default administrator account, type admin.
Note: While passwords are case-sensitive, user names are not
case-sensitive.
Note: Only one administrator at any given time can be logged on
to the library.
Note: If you want to log on using the default administrator
account (admin), and you do not remember the password,
contact technical support to reset the password.
Note: If the date and time have reset to January 1, 1970 or if the
year is set to a date earlier than 1970, a warning dialog will
display on login.
4 In the Password text box, type the password for the user or
administrator account.
To Next Page
Loading...
Need help?
General