Chapter 3: Configuring Your Library
Working With Partitions
Quantum Scalar i6000 User’s Guide 137
5 Select Simple, and then click Next. The Partitions - Step 2: Choose
Partition Properties dialog box appears.
6 Configure the following settings:
•In the Name text box, type a name that describes the new
partition.
•In the Drive Domain list, select the type of drive to be used in
the partition.
•From the Vendor ID list, select the vendor.
The Vendor ID information is used in the SCSI Inquiry
command. The choices are QUANTUM and ADIC. The default is
QUANTUM. Some backup applications may only support or be
configured for ADIC libraries, so if you configure a logical library
using the vendor ID of QUANTUM, the backup application
would not work with the library.
To Next Page
Loading...
Need help?
General