Chapter 3: Configuring Your Library
Using LDAP
Quantum Scalar i6000 User’s Guide 247
• User: Type the appropriate user name.
• Password: Type the user password.
c After you have entered all the LDAP configurations you wish,
click Test to verify the LDAP connection.
A message box displays indicating the success or failure of the
LDAP connection.
• If the connection failed, the error message contains
information that you can use to resolve the issue. Click OK
to return to the LDAP Configuration dialog box.
• If the connection succeeded, click OK.
5 To accept and save the library configuration, in the LDAP
Configuration dialog box, click OK.
To Next Page
Loading...
