Chapter 8: Encryption Key Management
Setting up EKM on the Scalar i6000
Quantum Scalar i6000 User’s Guide 309
• KMIP-compliant key management (SafeNet) supports
encryption for data cartridges using HP LTO-4 or later as well as
IBM LTO-5 or later Fibre Channel drives. If you are using KMIP-
compliant key servers and want to enable library managed
encryption for a partition, all of the tape drives in that partition
must be either HP LTO-4 and/or later or IBM LTO-5 and/or later
Fibre Channel tape drives.
Generating Encryption Keys for KMIP-compliant key servers:
Encryption keys are generated one at a time, as needed, upon
request.
Changing the Encryption Method
1 If you are not already viewing the physical library, click View and
select the name of the physical library.
2 Click Setup > Encryption > Partition Configuration. The EKM
Partition Configuration dialog box appears. Each partition’s
current encryption method is defaulted to Application Managed
unless the check box is selected in the Library Managed column.
To Next Page
Loading...
