Quantum Scalar i6000 User Manual

Chapter 10: Path Failover
Configuring Data Path Failover
382 Quantum Scalar i6000 User’s Guide
4 In the ADPF column, click the check box of the drive(s) on which you
want to enable or disable Advanced Data Path Failover.
Your choices are indicated by the following colors:
• Green - Added
• Yellow - Removed
• Te a l - Changed
• White - Unchanged
5 Click OK. An Operation in Progress dialog box appears.
6 When Advanced Data Path Failover configuration is complete, click
OK.
Note: Unless a drive is configured for control path failover, drives can
enable either BDPF or ADPF within the same partition.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing