Chapter 10: Path Failover
Configuring Host Access to Storage Networking Drives and Partitions
Quantum Scalar i6000 User’s Guide 417
15 Click OK in the The Host Access was updated successfully dialog
box.
Viewing All Access Groups
If you want to see all of the access groups you configured:
1 Select Setup > SNW Wizard to display the SNW Wizard.
2 Click Next.
3 Select the Host Access radio button and click Next.
4 Select the Host Access Configuration radio button.
5 Click Next to display the Select the Group to configure screen.
6 Select the Expand Tree box to list all items in the Access Group
Hosts and Devices section of the dialog box.
7 Click Cancel to exit.
8 Click Yes.
To Next Page
Loading...
