Quantum Scalar i6000 User Manual

Chapter 12: Partition Utilization Reporting
430 Quantum Scalar i6000 User’s Guide
2 Select the Enable Automatic Notifications check box.
3 Enter the proper address into the E-mail field.
4 Click Add. The account is added to the E-mail Address list.
5 To add more recipients to receive the report, type another recipient
e-mail address in the E-mail field and click Add. Repeat as
necessary.
Note: The total number of characters for all recipient e-mail
addresses listed in this section cannot exceed 512.
6 To delete a recipient, select the check box next to the recipient’s e-
mail address and click Remove.
7 Select how often recipients will receive reports from the Interval
drop-down list. If Quantum is doing the billing for this library, select
Monthly.
The interval choices are the following:
• Daily — Every day.
• Weekly — Every Monday.
• Monthly — The first day of every month.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing