Chapter 15: Maintaining Your Library
Monitoring the Library
Quantum Scalar i6000 User’s Guide 549
Note: Before you perform the following procedure, you must make
sure that e-mail is appropriately configured in the LMC so that
the library can send information to the recipient. See
Configuring E-mail on page 187.
1 Make sure that the status dialog box displays the status information
that you want to send.
2 Click Send. The Email, Save or Print Table dialog box appears.
3 Perform one of the following tasks:
• To indicate that you want to send the information as an e-mail
message to a recipient, select Email, and then either type an e-
mail address in the Email text box or select an existing address
from the drop-down list. You can type a comment in the
Comment text box to send with the information.
• To indicate that you want to save the information, select Save,
and then either type in the Save text box a path and a file name
to which you want the information saved or click Browse to
specify a location and a file name.
Note: The Save option is available to remote client users only.
It appears grayed out on the touch screen.
• To indicate that you want to send the information to a printer,
select Print.
Note: The Print option is available to remote client users only.
It appears grayed out on the touch screen.
To Next Page
Loading...
