Chapter 15: Maintaining Your Library
Monitoring the Library
Quantum Scalar i6000 User’s Guide 551
Note: You can only specify one e-mail address. If you need to
send the configuration record to multiple destinations,
repeat this procedure for each e-mail address.
4 Use the Comment box to type any additional information you want
to include in the e-mail message.
5 Click OK to send the configuration record and your comment text to
the specified e-mail address and close the Email Configuration
Record dialog box.
The e-mail message includes both the configuration record information
and your comments as embedded text with “Library Configuration
Information” as the subject.
Saving the Configuration Record
To save the configuration record:
1 Log on as an administrator.
2 From the menu bar, click Monitor > Email Configuration Record.
The Email Configuration Record dialog box appears.
3 Click Save and use the Browse function to specify the file name and
location.
4 Click OK to save the configuration record to the specified location
and close the Email Configuration Record dialog box.
To Next Page
Loading...
