Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
560 Quantum Scalar i6000 User’s Guide
The following table describes the elements on the Drives dialog
box.
Element Description
In the Drive(s) area:
Drive Type
drop-down list
Enables you to select the type of drives you want to list on the Drives dialog box
(for example, LTO1 for LTO-1 tape drives). All lists every drive in the library.
State The state of the drive (Varied On, Varied Off, or Pending [if in transition]).
Drive Type The type of drive (for example, LTO2 - FC).
Mode The mode the drive is in: Online or Offline.
Online indicates all SCSI and host commands are accessible.
Offline indicates any move command is disabled.
Location The location of the drive by means of a coordinate system. For information
about location coordinates, see
Understanding Location Coordinates on
page 459.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing