Chapter 15: Maintaining Your Library
Maintenance Actions
Quantum Scalar i6000 User’s Guide 565
3 To return to the Drives dialog box, click Cancel.
Mailing and Saving Drive Logs
The Get Drive Log button on the Drives dialog box enables you to send
drive logs to e-mail addresses. If you are accessing the LMC from a
remote client, Get Drive Log also enables you to save the information
to a ZIP file.
Note: You can mail or save logs from a remote client. However, you
cannot save logs from the library’s touch screen.
Before you perform the following procedure, you must make
sure that e-mail is appropriately configured in the LMC so that
the library can send logs to the recipient. For more information
about configuring e-mail, see Configuring E-mail on page 187.
1 From the Drives dialog box, click Get Drive Log. The Email or Save
Drive Log dialog box appears.
2 Perform one of the following tasks:
• To indicate that you want to send the log as an e-mail message
to a recipient, select Email, and then either type an e-mail
address in the Email text box or select an existing address from
the drop-down list. You can type a comment in the Comment
text box to send with the log.
To Next Page
Loading...
