Chapter 15: Maintaining Your Library
Maintenance Actions
Quantum Scalar i6000 User’s Guide 571
5 Perform one of the following tasks:
• To reset either an entire I/O blade, an individual Fibre Channel
port on an I/O blade, or an EEB, select the blade or port and
click Reset.
• To power cycle an I/O blade or EEB, select the blade and click
Power Cycle.
• To cause the LEDs on an EEB or I/O blade to blink rapidly so that
you can find it in the library, select the blade, and then click
Identify. After you locate the I/O blade, click Turn Off LED.
When you click Identify, the following dialog box appears.
To Next Page
Loading...
