Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
604 Quantum Scalar i6000 User’s Guide
Figure 65 CONFIG Button -
Good/Saved
Figure 66 CONFIG Button -
Warning/Unsaved
Saving a Remote Restore Image
Use the Save command to save a library configuration restore image on
a remote file system. To make sure that the image captures all library
configuration changes, save the image often.
1 Log on as an administrator from the remote client. The Save
command is not available from the library’s touch screen.
Click the CONFIG button on the LMC toolbar. The Save and Restore
Library Configuration dialog box appears.
Alternatively, make sure that you are viewing the physical library
(from the View menu, click the name of the physical library), then
click Tools > Save/Restore.
2 Click Save.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing