Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
624 Quantum Scalar i6000 User’s Guide
• Accessor Assembly
• Picker Assembly
• Drive Sled Assembly
•IE Assembly
•Scan Barcode
When one of the sub-tests is selected, you may be prompted to enter
additional information. For example, the Select FRU dialog box has tabs
along the top to select individual drives, I/E stations, and scratch tapes.
Custom Test
The Custom test enables you to run the Library Alignment sub-test on a
per-rack basis.
Sub-test Descriptions
Use the Verification Tests dialog box to select the test and sub-test, to
start the test, and view results.
Figure 67 shows the parts of the
Verification Tests dialog box. To display the dialog box, click To o ls >
Verification Tests.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing