Chapter 15: Maintaining Your Library
Maintenance Actions
664 Quantum Scalar i6000 User’s Guide
FRU Operational Tests
There are two ways to run the FRU operational tests. You can select the
FRU test from the Verification Tests dialog box. Alternatively, you can
run the test from the Ticket Details dialog box if that FRU is supported
by the verification tests.
The screens displayed by the FRU operational tests vary, depending on
which subtest was selected. For example, if you click Picker Assembly,
IE Assembly, or Drive Sled Assembly, the following dialog box appears
for selecting a scratch tape.
To Next Page
Loading...
