R&S TSMA6 - Page 72

Measurement Setup
R&S
®
TSMA6
72User Manual 4900.8057.02 ─ 11
Figure 7-11: Aligning R&S TSMA6, R&S TSME6 and R&S TSMExxDC
1 = R&S TSMA6
2 = Collar screws
3 = R&S TSME6
4 = Snap-in holes on the bottom pane of R&S TSME6 and R&S TSMExxDC
5 = R&S TSMExxDC
3. Connect DC power cable R&S TSMA6-BPP1 resp. R&S TSMA6-BP2T from
AUX1 / AUX2 to the DC IN socket of the devices (see Figure 7-12).
Vibration-proofed stacking