Ricoh B121 - Page 195

SERVICE PROGRAM MODE
SM 5-35 B121 Series/B259 Series
Service
Tables
4301
Display-APS Data
4301 1 Displays the status of the APS sensors and platen/DF cover sensor ( 5.1.17).
4303*
APS Small Size Original [0 = No (not detected) / 1 = Yes (A5/HLT LEF)]
4303 1 Selects whether or not the copier will consider the original to be A5/HLT LEF when
the APS sensors cannot detect its size. If “Yes” is selected, paper sizes that cannot
be detected by the APS sensors are regarded as A5/HLT LEF. If “No" is selected,
“Cannot detect original size” will be displayed.
4305*
APS Priority [0 = Normal / 1 = A4/LT / 2 = 8K/16K]
4305 1 1. A4/LT
• North America model: When the ASP detects the LT size, the controller interprets
it as the A4 size.
• Other models: When the ASP detects the A4 size, the controller interprets it as
the LT size.
2. 8K/16K (for the China model only)
• When the ASP detects the A3/B4 SEF, the controller interprets it as the 8K SEF.
• When the ASP detects the B5/A4 SEF, the controller interprets it as the 16K SEF.
• When the ASP detects the B5/A4 LEF, the controller interprets it as the 16K LEF.
The Europe model interprets undetected original sizes as A5 LEF under the
following conditions:
i. SP4-303-001 is "Yes," and
ii. SP4-305-001 is "Normal"
The Europe model interprets undetected original sizes as LT SEF under the
following conditions:
i. SP4-303-001 is "Yes," and
ii. SP4-305-001 is "A4/LT"
4428
Scan Auto-Adjustment
4428 1 Performs the automatic scanner adjustment. Use this SP mode after replacing the
white plate.