Rockwell Automation Allen-Bradley E300

322 Rockwell Automation Publication 193-UM015D-EN-P - February 2015
Chapter 8 Metering and Diagnostics
Second
Second (Parameter 37) reports the second in the virtual real-time clock of the
E300 Electronic Overload Relay.
Table 386 - Second (Parameter 37)
Invalid Configuration Parameter
Invalid Configuration Parameter (Parameter 38) reports the parameter number
that is causing a configuration trip in the E300 Electronic Overload Relay. See
Chapter 4
for more information about a configuration fault.
Table 387 - Invalid Configuration Parameter (Parameter 38)
Invalid Configuration Cause
Invalid Configuration Cause (Parameter 39) reports the reason for the
configuration trip in the E300 Electronic Overload Relay. See Chapter 4
for
more information about a configuration fault.
Table 388 - Invalid Configuration Cause (Parameter 39)
Default Value 0
Minimum Value 0
Maximum Value 60
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units
Default Value 0
Minimum Value 0
Maximum Value 9999
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units
Default Value 0
Range
0 = No Error
1 = Value Over Maximum
2 = Value Under Minimum
3 = Illegal Value
4 = L3 Current Detected
5 = CopyCat Error
Parameter Type USINT
Size (Bytes) 1
Scaling Factor 1
Units