408 Rockwell Automation Publication 193-UM015D-EN-P - February 2015
Chapter 9 EtherNet/IP Communications
13. To control the output relays or issue a remote reset command to the E300
Electronic Overload Relay navigate to the output tags created by the Add-
on Profile.
Offline E300 Electronic Overload Relay Logix Integration with Add-on
Profile
The E300 Add-on Profile for RSLogix 5000 and Studio 5000 provides an
efficient means to allow you to configure an E300 Electronic Overload Relay
offline in a new or existing project. You can take advantage of copying and pasting
an offline configured E300 Electronic Overload Relay to quickly configure
multiple E300 Electronic Overload Relays.
The E300 Add-on Profile automatically enables Automatic Device
Configuration in which the Logix controller will download the configuration
setting changes to the E300 Electronic Overload Relay when the Logix controller
establishes a connection to it.
ATTENTION: Any preconfigured E300 Electronic Overload Relay configuration
data will not be retained when downloading an RSLogix 5000 or Studio 5000
project to a Logix controller.
To Next Page
Loading...
