414 Rockwell Automation Publication 193-UM015D-EN-P - February 2015
Chapter 9 EtherNet/IP Communications
14. To access the data provided by the E300 Electronic Overload Relay
EtherNet/IP Communication Module, navigate to input tags created by
the Add-on Profile.
15. To control the output relays or remote reset the E300 Electronic Overload
Relay navigate to the output tags created by the Add-on Profile.
Offline E300 Electronic Overload Relay Integration with a Generic
Profile
For users who would like to establish communications between an E300
Electronic Overload Relay and a Logix Controller with Automatic Device
Configuration disabled or between a non-Logix based automation control
system, a Generic Profile can be used.
Follow the steps provided to integrate an E300 Electronic Overload Relay using a
Generic device profile to a Logix controller offline:
To Next Page
Loading...
