422 Rockwell Automation Publication 193-UM015D-EN-P - February 2015
Chapter 9 EtherNet/IP Communications
6. Check the desired notification time, fault conditions, and local conditions
to be included in notification e-mails to the recipient. You can change
these after the initial configurations.
7. Click Apply to accept the configuration
8. When an E300 Electronic Overload Relay event occurs, the e-mail
message will look like the following:
E-mail Recipient The e-mail address of the person who will receive the notifications.
E-Mail Sender The e-mail address from which the notification will be sent.
SMTP Server Consult with the network administrator for the SMTP server address.
SMTP Username Consult with the network administrator for the SMTP username.
SMTP Password Consult with the network administrator for the SMTP password.
SMTP Port Consult with the network administrator which SMTP port number to
use. Port 25 is the most common SMTP port.
To Next Page
Loading...
