SATO FX3-LX - Page 274

[SDPL]
274
The label size set in the printer is used as a reference of rotation.
The options are as follows:
0 degree
Labels are printed in portrait orientation.
90 degree
Labels are printed in landscape orientation.
180 degree
Labels are printed in inverse-portrait orientation.
270 degree
Labels are printed in inverse-landscape orientation.
[SOP Emulation]
Set the SOP emulation.
The options are as follows:
• [Disabled]
• [Prodigy Plus - 110]
• [Allegro - 220]
• [Prodigy - 250]
• [Auto]
[Compatible Mode]
Set the compatible mode for SDPL.
The setting items are as follows:
[TTF]
Enable or disable TrueType font compatible mode.
Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.
Disable TrueType font compatible mode.
[Graphics]
Set whether to allow the registration of graphic data even if a line feed code is omitted.
[Right-to-Left print]
Set the Right-to-Left printing function.
The options are as follows: