SATO FX3-LX - Page 275

275
Disabled
All texts are printed from left to right.
Auto
When an Arabic font is detected, the Arabic text is printed from right to left.
[Prioritize]
Select the settings to be prioritized for each setting item of the SDPL command. You can set whether
to prioritize settings through the printer or through commands.
When you select [Settings] for an item, the setting specified in the [SDPL] menu of the printer will be
used.
The setting items are as follows:
[Format Attribute]
Set whether to prioritize the settings through the printer or through commands for the format attribute
setting.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the printer.
[Pause Mode]
Set whether to prioritize the settings through the printer or through commands for the pause mode
setting.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the printer.
[1 Byte Codepage]
Set whether to prioritize the settings through the printer or through commands for the 1 byte code
page setting.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the printer.