327
[PIN]
Set the wireless LAN connection using the PIN code method.
1. Tap [PIN] in the [Wi-Fi Protected Setup(WPS)] menu.
2. When [Scanning...] appears on the screen, set the PIN code shown on the screen to the access
point of the wireless LAN or computer.
3. When the connection to the access point is established, [Successfully configured.] appears on the
screen.
[Wi-Fi Direct]
Set the Wi-Fi Direct function.
The Wi-Fi Direct function is enabled only if you have selected [Infrastructure] in the [Wi-Fi Connection
Setting] > [Mode] menu. If you have changed the setting from [Ad-hoc] to [Infrastructure] in the [Wi-Fi
Connection Setting] > [Mode] menu, reboot the printer before setting the Wi-Fi Direct function.
The setting procedure is as follows:
1. Set the device name for the printer using [Device Name]. You can enter 1 to 16 characters.
Alphabets (capital and small letters), numbers and symbols can be used.
2. Select [Connect] to search and show the connectable device names or to accept connection
requests when the printer is the GO (Group Owner). Tap the device name you want to connect.
3. Select [Start Group] if you want to start a new persistent group or select a group from the list.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
