35
Rear View
(1) Media loading port (for fan-fold media)
(2) DC input connector
Before connecting, make sure that the AC voltage of your region is in the range of AC 100 to 240
V, 50 to 60 Hz.
(3) USB connector (Type A)
Enable the storage of printer settings information with USB memory.
Also, other devices like a barcode scanner or keyboard can be connected.
• Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
(4) USB connector (Type B)
To connect the printer to the computer using the USB interface.
(5) LAN connector (USB+LAN model only)
To connect the printer to the network using the LAN interface.
To Next Page
Loading...
